Fixing up the new Yanmar excavator


Comments • 2 114

  • Aaron
    Aaron  2 hours back

    I would let Andrew give me a vasectomy with a excavator

    • bridgetbishop1996
      bridgetbishop1996  4 hours back

      Andrew *casually uses excavator to change track on excavator* lol

      • dan mccarthy
        dan mccarthy  14 hours back

        probably to late ,but old track is great for laying down where your towmotor might get stuck and allow you to operate outside.

        • Summit X
          Summit X  2 days back

          You were good up until changing the track rollers... First you broke the bolt standing on the pipe while tightening, not loosening the bolt. Ultimately you got it done but rushing with the cutting torch you messed up the bolt holes. You know you can do better, still good video though.

          • Andrew Camarata
            Andrew Camarata   2 days back

            There was no nut on the other side, It didn't matter what way I was going, just wanted it to turn.

        • The_Meninist_Podcast_Network Podcast

          when in doubt youse spray paint

          • J M
            J M  1 weeks back

            A friend of mine has a Yanmar B50 and one great thing about yanmar is that they put multiple filters on the fuel system. That saved his machine when the fuel tank got rusty. I would suggest you take a good look inside your tanks to see if there is rust. It's a good idea to keep the fuel filled up during the summer months when moisture in the air, inside the tank, will condense and water will cause rust.

            • J M
              J M  1 weeks back

              @Andrew Camarata They sell bio-cides that are suppose to kill bacteria that grow inside of fuel tanks. Perhaps that would help prevent problems.
              I knew a mechanic who said he had a large set of steel balls (no pun intended LOL) that he used to put inside of tanks where he would shake them around ( no really ) to get the rust out ( ha ! )

            • Andrew Camarata
              Andrew Camarata   1 weeks back

              When I got that machine a dirty tank kept clogging filters. I had to remove the tank and pressure wash it out. This was 6 years ago and I have not had any problems since.

          • Jeroen van den Ploeg
            Jeroen van den Ploeg  1 weeks back

            Great videos and awesome shed! God bless.

            • Joe Mezzanini
              Joe Mezzanini  1 weeks back

              Try These;-> Solder and Heat Shrink in one connector. They work great:

              • ScionTcModz Mctrash
                ScionTcModz Mctrash  1 weeks back

                I would a pice of the track!!

                • Vrig
                  Vrig  2 weeks back

                  Dude.. how.. did you .. uhm did you do all this during the span of 1 day? :o

                  • SergeantSpoon
                    SergeantSpoon  2 weeks back

                    You motivate me Andrew

                    • Joe T. Martinez
                      Joe T. Martinez  2 weeks back

                      Andrew on the pin you polled off your escalator the pins that used to make for deferent company’s. I used to cut the shaft 1/2 longer ea side turn the shaf 1/4 snap ring measure your snap ring make it fifteen to twenty thousand deep. On the end of the drill a hole so you put grease insert drill tap and drill small drill 3 1/2in Deep major how deep you drill your middle Hole, drill a hole on the top of the shaft until hit the hole in the middle of the shaft. I came up with this when I started to make all the shafts. Every contractor loved them. They told me they little longer,

                      • jcrs1962
                        jcrs1962  2 weeks back

                        Not sure if anyone has commented this ... but I has a Yanmar diesel tractor. ... Needed a few bolts and other things and found out Yanmar make the John Deere engines. I got may different parts by just comparing. Not sure this would help in your situations.

                        • J Mac
                          J Mac  2 weeks back

                          Every time I break a sledge or an axe handle I use fire to get the piece of wood out of the sledge or axe head

                          • J McCracken
                            J McCracken  2 weeks back

                            Andrew, work ethics and mechanical skills are amazing tell us how long you have been performing mechanical work? My Dad was a Master Mechanic himself on Cats and other heavy stuff. I do believe if Dad were alive he sure would be impressed. Keep doing what you do and best wishes for a great future.

                            • mmanut
                              mmanut  2 weeks back

                              You amaze me every video. Very talented, very impressive‼️👍👍. Vinny 🇺🇸

                              • CR Hutchinson
                                CR Hutchinson  2 weeks back

                                hutch- Andrew, been watching your videos for about a year now, just wanted to thank you for all the inspiration you give me when i am feeling lazy or just "down", please keep it up and be careful.

                              • Ian Horne
                                Ian Horne  3 weeks back

                                Hi Andrew, in one of your other videos you said that you had to put your name and business on your truck how come you haven't got them on your other machines like your excavators if you do people would easily recognise your equipment

                                • Varnce
                                  Varnce  3 weeks back

                                  What’s with all the blue paint on it? Did you use it to busy open a bank machine?

                                  • Richard Schreiber
                                    Richard Schreiber  3 weeks back

                                    I like your CAN DO attitude, and your ability to try. BE SAFT IN ALL YOU DO !!!

                                    • lotfi ben zekri
                                      lotfi ben zekri  3 weeks back

                                      It is amazing you always do very hard ans Nice job, you are not afraid of anything, I am learning many things from you.

                                      • Zouhair Suleiman
                                        Zouhair Suleiman  3 weeks back

                                        Andrew you’re one bad ass M F
                                        You can fix anything I could never do what you do

                                        • PJ Jackson
                                          PJ Jackson  3 weeks back

                                          Do you have a video on what to look at when buying used heavy machinery? Or what size machine do I need?

                                          • PJ Jackson
                                            PJ Jackson  3 weeks back

                                            Andrew Camarata Lol. Sounds easy enough. I’m new to heavy machinery, but I’ve been inspired by your channel to start from the ground up at 35 years old and pursue my dream. My goal is to buy some land, build a workshop, buy a truck and trailer and start looking for deals on used machinery I can fix up and dig myself a giant lake. You have a beautiful spread up there. Thanks for sharing your experiences. I wish my Dad had taught me how to do all the useful stuff you are able to do. I have really learned a lot from your channel.

                                          • Andrew Camarata
                                            Andrew Camarata   3 weeks back

                                            Make sure it says "Made in Japan"

                                        • Michael Brown
                                          Michael Brown  3 weeks back

                                          Dont need parts. Lol orders parts.

                                          • William Hanna
                                            William Hanna  3 weeks back

                                            Excellent job !

                                            • Алик Усманов

                                              Всякую хуйню несёшь

                                              • HE-MAN 5678
                                                HE-MAN 5678  4 weeks back

                                                You should build a pole barn and keep your equipment stored inside

                                                • Aaron Kashmer
                                                  Aaron Kashmer  4 weeks back

                                                  One thing Missing... A big set of Speakers! I rock out while working...!

                                                  • Joe Garcia
                                                    Joe Garcia  4 weeks back

                                                    Great video my friend! I wish you were in NM and owned a repair shop,we’d be giving you business constantly! Can you please help me in directing me to parts for a 1989 Moffett forklift please. Thank You Sir!!

                                                    • Joseph Longbottom
                                                      Joseph Longbottom  4 weeks back

                                                      Never seen frozen Texas toast pizza before...

                                                      • blud work
                                                        blud work  4 weeks back

                                                        wood jacks. you're a brave one

                                                        • Sirko Günther
                                                          Sirko Günther  4 weeks back

                                                          Nice Video 👍

                                                          • Concepcion Amancio
                                                            Concepcion Amancio  4 weeks back

                                                            I've seen you change oil a couple of times and rub the new filter on top of the old filter...some people don't know why and it goes over their heads...LOL...I grew up in a gas station changing everything...oil...bearings...spark plugs and so on...I'm like Stephen Singletary...I enjoy your videos...EXPLAIN...the filter thing next time...!!!TY

                                                            • Lori Neid / Tiny Toad Farm

                                                              I don't ever plan on working on engines or equipment, I have used basic equipment around the farm and I drive so having some kind knowledge about maintenance saves me so much money in the long run.
                                                              For instance, some one tried to sell me rim's for a ford truck, because one had a notch in it like some one hammered it 🤷‍♀️. I looked then instantly said : that can be ground out. surprised myself even, and it did grind out lol

                                                              • Lori Neid / Tiny Toad Farm

                                                                About the bolt removal **Jesus marry and Josef 🤦‍♀️**

                                                                • Teresa Brewer
                                                                  Teresa Brewer  4 weeks back

                                                                  AMAZING TALENT..

                                                                  • dirtyshirtinfo
                                                                    dirtyshirtinfo  1 months back

                                                                    Man, how about that work ethic? 🙂👍

                                                                    • Alan Hill
                                                                      Alan Hill  1 months back

                                                                      Did you get them to take those rollers back ?

                                                                      • Artemus Rodricq
                                                                        Artemus Rodricq  1 months back

                                                                        you know I watched this a while back. but your movie making and craftsmanship are just so "old-school" right on I watch them again and again. This time I wanted to comment where'd you get this machine? Was it from Disneyland after MICKEY MOUSE built a brick house for the three little porkers?

                                                                        • jeremy vaiz
                                                                          jeremy vaiz  1 months back

                                                                          On those tracks just put your front loader all the way down, and on the opposite side put your bucket down and it'll lift the whole excavator even on both sides

                                                                          • RenoHuskerDu
                                                                            RenoHuskerDu  1 months back

                                                                            I rent 'em. The Yanmar is no longer gray market. It's clearly stronger than other 3ton machines in the rental market.

                                                                            • TDF9891
                                                                              TDF9891  1 months back

                                                                              I look forward to you breaking things because I know an hour long video will be coming soon after.

                                                                              • BriZZell
                                                                                BriZZell  1 months back

                                                                                whats a good 50 go for cost wise

                                                                                • ERIC EDMUND
                                                                                  ERIC EDMUND  1 months back

                                                                                  IS THERE ANYTHING ANDREW CAN'T DO ???????? AMAZING TALENT.

                                                                                  • Jman playz
                                                                                    Jman playz  1 months back

                                                                                    This man is smart af. Like how?

                                                                                    • Bob Young
                                                                                      Bob Young  1 months back

                                                                                      I watch every video you post and I find every one useful and informative. I like the fact that you send every machine out painted and looking smart! Well done!

                                                                                      • Greg
                                                                                        Greg  1 months back

                                                                                        15:05 Texas Toast Pizza

                                                                                        • wisdom wii
                                                                                          wisdom wii  1 months back

                                                                                          i wanted to own an excavator but i am worry cant fix it when it have problem.. and it will cost a lot too..